HP PROLIANT ML330 Quickspecs page 31

QuickSpecs
Memory
PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if
the slower DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be
1066MHz If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in
each of the other channels, the maximum speed will be 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the
other channels, you run at 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
Maximum memory speed will also depend on the processor installed. References to the above MHz speeds are for the
various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
Chnl 0
Chnl 1
Chnl 2
Standard memory configuration (1 CPU model)
4GB, consisting of three (2) 2GB dual-rank PC3-10600 RDIMMs (Base model)
Chnl 1
Chnl 2
Chnl 3
18 DIMM SLOTS (9 per CPU node)
CPU1
slot # population order
1 G
2 D
3 A
4 H
5 E
6 B
7 I
8 F
9 C
CPU1
slot # population order
1 G; empty
2 D; empty
3 A; 2GB DIMM
4 H; empty
5 E; empty
6 B; 2GB DIMM
7 I; empty
8 F; empty
9 C; empty
DA - 13361 Worldwide QuickSpecs — Version 17 — 3-31-2010
HP ProLiant ML330 Generation 6
CPU2
slot # population order
1 G
2 D
3 A
4 H
5 E
6 B
7 I
8 F
9 C
CPU2
slot # population order
1 G; empty
2 D; empty
3 A; empty
4 H; empty
5 E; empty
6 B; empty
7 I; empty
8 F; empty
9 C; empty
Chnl 0
Chnl 1
Chnl 2
Chnl 1
Chnl 2
Chnl 3
Page 31