Gibson Digital Guitar Owner's Manual page 49

F u n c t i o n Display LEDs
Speed / Pegs shines white,
A c c u r a c y A shines blue
S e t t i n g s
MCK Position
Enter Setup
Mode and turn to
A LED
A c t i o n R e m a r k s
P ress display once.
The Powertune system is adjustable to a pitch
C u rrent Speed /
accuracy of .2 Cent. However, this will cause
Accuracy setting will
tuning functions to take slightly longer, and in
be indicated by
live applications a relaxed accuracy is advisable.
flashing green LEDs
T h e re are 6 levels of setting. The factory pre s e t
(as described below)
setting will show 4 green flashing LEDs, indicating
that you are using an accuracy setting of appro x .
1 Cent, which is practical for most applications.
Relaxing this setting will cause the overall tuning
p rocess to run at a faster rate, and this can be
useful in live applications. In the studio, you would
want the maximum accuracy measurable. In this
case, range will be changed and adjusted by
rotating the MCK. The high end of accuracy (.2 Cent)
is indicated by 6 green LEDs. The low end (i.e.,
fastest speed) is indicated by one green LED.
Even at the low end, accuracy of tuning is still
2.5 Cent! To store your chosen setting, press display
once. You will leave Setup Mode automatically.
47