Gibson Digital Guitar Owner's Manual page 35

F u n c t i o n Display LEDs
R e f e rence Tuning I LED shining re d
( Tune to selected
re f e rence pitch)
MCK Position
Pull MCK out and
t u rn to I LED
A c t i o n R e m a r k s
Pull out (disengage) the S t rum the SAME string you have just tuned to your
peg of the Powerh e a d re f e rence pitch. When this string's LED shines solid
g reen its frequency has been measured and store d .
you choose to tune to a
Now strum all strings, and the Powertune system will
re f e rence pitch. Now
tune your guitar to 'normal tuning' based on your
tune this string to
chosen re f e rence string. (LEDs will behave the same
match your chosen re f-
as during normal tuning.) When the re f e rence tuning
e rence. Push peg back
is achieved, the "I" will flash on and off in blue.
into engaged position.
Begin tuning your guitar
Should you wish to store your new 'Reference Tu n i n g , '
by pressing the display.
simply turn the MCK to one of the factory pre s e t
The letter "I" will shine positions (E, A, D, G, B, or e) and press the display
g reen and ALL string once. The display LEDs will flash blue 3 times to
indicate your new Reference Tuning has been store d
LEDs will shine re d .
at that position, and can be recalled in the same
manner as any other preset by choosing that position.
(Remember that you don't have to "store" your new
R e f e rence Tuning. Simply push the MCK back into
n o rmal position and you are ready to go!)
33