Table of Contents
Advertisement
Using component video (better)
Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component
3.5mm RCA
video cable
audio cable
connectors
connectors
Component
Analog
video jacks
audio jacks
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the VIDEO/Y, P
the COMPONENT OUT jacks on the DVD or Blu-ray player.
3 Connect a 3.5mm RCA stereo audio cable (not provided) to the L and R AUDIO jacks on the side of your TV and
to the L/R AUDIO OUT jacks on the DVD or Blu-ray player.
Notes
• The VIDEO/Y, P
• When you connect the audio using the L and R AUDIO jacks, the audio
4 Plug your TV's power cord into a power outlet, then turn on your TV and the DVD or Blu-ray player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or
to select Component/AV, then press ENTER.
22
DVD or Blu-ray player
Component video cable
, and P
B
R
device) share the L and R AUDIO jacks with the VIDEO/Y jack (used to
connect an AV (composite video) device).
output is analog.
www.insigniaproducts.com
NS-28DD310NA15 Insignia 28" LED TV/DVD Combo
3.5mm RCA
stereo audio
cable
video jacks (used to connect a component
Side of TV
, and P
jacks on the side of your TV and to
B
R
Advertisement
Table of Contents
