Table of Contents
Advertisement
Insignia 28" LED TV/DVD Combo
Using DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI1/DVI jack to connect a DVD or Blu-ray player using
DVI. If you use another HDMI jack, you will not hear sound from the TV
speakers.
On your TV
HDMI cable
3.5mm RCA
connector
audio cable
connector
HDMI1/DVI
PC/DVI
jack
AUDIO IN
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the DVD or Blu-ray player.
3 Connect the other end of the cable to the HDMI1/DVI jack on the back of your TV.
4 Connect a 3.5mm RCA audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to
the AUDIO OUT jacks on the DVD or Blu-ray player.
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio
output is analog.
5 Plug your TV's power cord into a power outlet, then turn on your TV and the DVD or Blu-ray player.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
or
to select HDMI 1, then press ENTER.
Note
You can also press HDMI to select the DVD or Blu-ray player.
jack
www.insigniaproducts.com
3.5mm RCA
audio cable
Back of TV
DVD or Blu-ray
player
HDMI cable with
HDMI-DVI adapter
21
Advertisement
Table of Contents
