Map Page; Configuring Tis Traffic Data On The Map Page - Garmin 400 Series Pilot's Manual Addendum

Map Page

TIS traffic is displayed on the Map Page in addition to the Traffic Page.
Configuring TIS Traffic Data on the Map Page
To configure TIS traffic on the Map Page:
1. Turn the small right knob to select the Map Page.
2. Press the MENU key.
Turn the small right knob to select 'Setup Map'?
3. The flashing cursor highlights the GROUP field.
Turn the small right knob to select 'Traffic' and press ENT.
4. Turn the large right knob to select the desired Traffic Mode option. Turn the small right knob to select
the desired option and press ENT. Repeat the step for Traffic Symbol and Traffic Label.
5. Press CLR to return the Map Page.
The traffic mode selection menu allows the user to choose from the following:
• All trfc - All traffic is displayed on the Map Page.
• TA/PA - Only traffic advisories and proximity advisories are displayed on the Map Page.
• TA only - Only traffic advisories are displayed on the Map Page.
From the Map Page you can display traffic in a thumbnail format in any of the top three (400 Series) or
four (500 Series) data fields on the right side of the Map Page.
To display Thumbnail Traffic on the Map Page:
1. Turn the small right knob to select the Map Page.
2. Press the MENU key and display the Page Menu.
3. Turn the small right knob to select 'Change Fields?' and press ENT.
4. Select one of the top three (400 Series) or four (500 Series) configurable fields. Select 'TRFC' from the
Select Field Type List and press ENT. Note that the thumbnail range defaults to 6 nm and cannot be
changed.
Section 2
Controls and Display
The Map Page displaying traffic.
Thumbnail Traffic displayed on the GNS 430.
NOTE: The thumbnail will display traffic coasting
'TRFC CST' or traffic removed 'TRFC RMVD'
in the lower right when TIS messages have been
missed.
7