Operation Pages - Sears Cleanmore 175.8575180 Owner's Manual

OPERATION
See Figure 5.
4. Attach the large vacuum hose to recovery tank
intake. (Vacuum inlet)
5. Attach solution tubing to solution tank by insert-
ing plastic insert into plastic coupling.
NOTE: To remove plastic insert depress Tab and
gently pull on plastic insert. Be careful not to pull
on tubing as damage may occur.
— PREPARATION-
VACUUM CARPET
See Figure 6.
1. For best cleaning results it is recommended that
the carpet be vacuumed to remove loose dirt
before using the Cleaner.
PRETREAT CARPET (IF NEEDED)
See Figure 7.
1. To remove stains and ground in soil present in
heavy traffic areas of the carpet, spray or rub
Sears spotter (Formula #3) into carpet before us-
ing the cleaner. Follow directions on the bottle.
FILLING CLEANER WITH WATER AND
CLEANING SOLUTION
See Figure 8.
1. Add Sears Formula #1 carpet cleaning solution or
Sears Formula #4 upholstery cleaning solution to
supply tank (depending on type of cleaning to be
performed). Follow directions on label of bottle.
2. Pour clean hot water (from tap) into Filler Opening
in the Supply Tank - use 2 gallons of water.
3. Close Filler Opening.
NOTE: This unit may become damaged if boiling
water is used.
LARGE VACUUM HOSE
PLASTIC
COUPLING
TAB
SOLUTION
TUBiNG
PLASTIC
INSERT
Figures
Figure 7
FILLER
OPENING
SUPPLY TANK
Figures
Page 5