•
Do not turn off the product or pull a connected USB storage device out while the USB
storage device is in use. Doing so may result in damage to the USB storage device or stored
file.
•
Use a USB storage device which contains normal files. Abnormal files can cause a
malfunction or the files may not play.
•
USB storages must be formatted in FAT16/FAT32/NTFS. FAT32 and NTFS are
recommended for HDD (Hard Disk Drive).
•
As the data in the USB storage device can be damaged, please back up important data to
avoid loss. The user is responsible for data management. BenQ shall not be held liable for
any data loss.
•
File tree in USB storage should be as simple as possible. Too many or too many layers of
folders will result in lag of access time.
•
If an external memory device does not operate after you've connected it to the projector,
try to connect it to a PC. If it still does not operate normally, contact the memory device's
manufacturer service center or related customer center.
31
Connection