Grandstream Networks GXP2140 User Manual page 64

Server
Allow DHCP Option 120
to override SIP Server
3CX Auto Provision
Automatic Upgrade
Hour of the Day (0-23)
Day of the Week (0-6)
Authenticate Conf File
Maintenance -> Syslog
Syslog Server
Syslog Level
Send SIP Log
Auto Recover From
Abnormal
Maintenance -> Language
Display Language
Language File Postfix
Maintenance -> TR-069
Enable TR-069
ACS URL
TR-069 Username
FIRMWARE VERSION 1.0.0.17
Enables DHCP Option 120 from local server to override the SIP Server on the
phone. The default setting is "No".
Phone will multicast SUBSCRIBE for provision if this feature is enabled.
Enables automatic upgrade and provisioning. The default setting is "No".
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Authenticates configuration file before acceptance. The default setting is "No".
The URL or IP address of the syslog server for the phone to send syslog to.
Selects the level of logging for syslog. The default setting is "None". There are
4 levels: DEBUG, INFO, WARNING AND ERROR.
Syslog messages are sent based on the following events:

product model/version on boot up (INFO level);

NAT related info (INFO level);

sent or received SIP message (DEBUG level);

SIP message summary (INFO level);

inbound and outbound calls (INFO level);

registration status change (INFO level);

negotiated codec (INFO level);

Ethernet link up (INFO level);

SLIC chip exception (WARNING and ERROR levels);

memory exception (ERROR level).
Configures whether the SIP log will be included in the syslog messages. The
default setting is "No".
If set to "Yes", the phone will automatically recover when running abnormal.
Selects display language on the phone.
Specifies the language file postfix for downloaded language.
Enables TR-069. The default setting is "No".
URL for TR-069 Auto Configuration Servers (ACS).
ACS username for TR-069.
GXP2140/GXP2160 USER MANUAL Page 64 of 79