HP LTO-3 960 Quickspecs page 24

QuickSpecs
Technical Specifications
Environmental Environmental Environmental Environmental
Specifications Specifications Specifications Specifications
Standards Compliance Standards Compliance Standards Compliance Standards Compliance
Front Panel LED Front Panel LED Front Panel LED Front Panel LED
Indicators Indicators Indicators Indicators
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For tape drives and media, 1 GB = 1 billion bytes. Actual formatted capacity is less.
Temperature range Temperature range Temperature range Temperature range
Non-condensing humidity Non-condensing humidity Non-condensing humidity Non-condensing humidity
range range range range
CSA Certification to C22.2, No.60950 (cCSAus)
TÜV EN60950 (IEC 60950 and EN60950)
CE Declaration of Conformity
FCC 47 CFR Parts 15
NOM
VCCI
C-TICK
RRL
BSMI
GOSH
CB Certificate and Report (IEC 60950)
HP Ultrium tape drives have four LED indicators on the front panel:
Ready
Drive Error
Tape Error
Clean
Please consult your HP StorageWorks Ultrium Tape Drive "Getting Started Guide" for more information
on how to use these LED indicators for ascertaining drive status and for help in troubleshooting your HP
Ultrium tape drive.
DA - 11739 Worldwide — Version 31 — January 25, 2008
HP StorageWorks Ultrium Full-Height Tape Drives HP StorageWorks Ultrium Full-Height Tape Drives HP StorageWorks Ultrium Full-Height Tape Drives HP StorageWorks Ultrium Full-Height Tape Drives
Operating:
50° F to 95° F (10° C to 35° C) if 6 CFM airflow is provided
50° F to 104° F (10° C to 40° C) if 8CFM airflow is provided
Non-Operating: -40° F to 151° F (-40° C to 66° C)
Operating: 20 to 80% RH (Non-condensing, max wet bulb temperature =
26C)
Non-Operating: 10 to 95% RH (Non-condensing, max wet bulb temperature
= 26C)
Page 24