Acura 2002 RSX Owner's Manual page 254

Main Menu
Table of Contents
3. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
4. Test the lights to make sure the
new bulb is working.
5. Slide the right side of the light
assembly into the hole. Push on
the left side to latch the assembly
into place.
Replacing the Spotlight Bulbs
Remove the lens of the burned out
1.
bulb by carefully prying on the
edge between the lenses with a
fingernail file or a small flat-tipped
screwdriver.
Remove the bulb by pulling it
2.
straight out of the bulb holder.
3. Push the new bulb into the bulb
holder.
4. Reinstall the lens by inserting the
outside edge first, then pushing on
the inside edge.
Maintenance
Lights
B B U U L L B B
251