Acura 2002 RSX Owner's Manual page 252

Main Menu
Table of Contents
Replacing Rear Bulbs
C C O O V V E E R R
1. Open the hatch. Remove the light
assembly cover by pulling on the
tab on the outside edge.
Determine which of the five bulbs
2.
is burned out: stop/taillight, turn
signal light, side marker light,
back-up light, or taillight.
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
6. Test the lights to make sure the
new bulb is working.
7. Install the light assembly cover.
Make sure it locks in place.
Maintenance
Lights
249