HP StorageWorks AiO600 Quickspecs page 11

QuickSpecs
Product Configuration Wizard
In the following steps you will be guided through a series of steps to help you configure the best solution for your environment. You
will also be supplied with information about complementary products that can be ordered at the same time. It is important to note
that HP StorageWorks All-in-One Storage Systems include all of the software features and benefits listed above as standard features;
this means that there are no expensive upgrades or options required to achieve this integrated storage functionality and data
management.
NOTE: The steps outlined below are intended only as a guide for the options available. All options chosen are not be factory
integrated or configured and ship as separate components.
Step 1 - Order the desired HP All-in-One Storage System based on capacity, performance,
scalability, and redundancy requirements.
AiO600 Configurations
NOTE: The AiO600 is configured as a tower but can easily be converted to a rackable array by installing the AiO600 Tower to
Rack Conversion Kit which includes face plate, rails, and all rack mount hardware. Part number AG546A.
HP StorageWorks Processor
AiO600 Common
Specifications
Memory
Operating System
Storage Controller
Optical Drive
Network Controller
Form Factor
Power Supply
Cooling Fans
Remote Management
Protocol Support
iSCSI Initiator Support Compliant with iSCSI industry standards and compatible with industry
HP StorageWorks Internal Storage
AiO600 1.5TB SATA
Model
AG536A (Americas)
AG537A (AP)
AG538A (EMEA)
AG539A (Aust)
HP StorageWorks Internal Storage
AiO600 3.0TB SATA
Model
AG541A (Americas)
AG542A (AP)
AG543A (EMEA)
AG544A (Aust)
DA - 12786
HP StorageWorks 600 All-in-One Storage System
Dual Core Intel Xeon 2.67 GHz/1333 MHz FSB with 4MB (1 x 4MB) L2
Cache (Up to 2 processors supported)
1 GB of memory standard, expandable to 4 GB
Windows Storage Server 2003 Release 2, Standard Edition
Smart Array E200i Controller with 128MB BBWC
HP DVD+R/RW 16X Half Height internal
Embedded NC373i Multifunction Gigabit Network Adapter with TCP/IP
Offload Engine plus additional Dual port NC360T 10/100/1000T
5U tower or rack mount with optional conversion kit
Standard dual Hot-Plug redundant power supplies
Standard two system fans plus redundant set of two system fans
Remote management User Interface (UI), Remote Desktop, or Telnet.
Integrated Lights Out 2 (iLO2)
SMB/CIFS, NFS, NCP, AppleTalk, HTTP, FTP
standard iSCSI initiators. Interoperability has been verified for Windows
2000, Windows Server 2003, VMware ESX Server 3, SUSE Linux
Enterprise Server 10, RedHat Enterprise Linux 5, and Qlogic 4050c
6 x 250GB front loading, hot plug, 7200 RPM SATA HDDs
6 x 500GB front loading, hot plug, 7200 RPM SATA HDDs
Worldwide QuickSpecs — Version 3 — 9.12.2007
(AiO600)
Page 11