1
1 securing clips (2 per connector)
NOTICE:
Insert memory modules at a 45-degree angle to avoid damaging the connector.
Ground yourself and install the new memory module:
4
NOTE:
If the memory module is not installed properly, the computer may not boot properly. No error
message indicates this failure.
Align the notch in the module edge connector with the tab in the connector slot.
a
Slide the module firmly into the slot at a 45-degree angle, and rotate the module down
b
until it clicks into place. If you do not feel the click, remove the module and reinstall it.
Replace the cover.
5
NOTICE:
If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close
may damage your computer.
2
2 memory module
Adding and Replacing Parts
133