Dell LATITUDE D630 PP24L User Manual page 130

To add or replace a memory module in the DIMM B connector:
NOTICE:
connector labeled "DIMMA" before you install a module in the connector labeled "DIMMB." Insert
memory modules at a 45-degree angle to avoid damaging the connector.
Follow the procedures in "Before You Begin" on page 123.
1
Turn the computer bottom-side up, loosen the captive screw in the memory module cover,
2
and then remove the cover.
NOTICE:
module securing clips.
If you are replacing a memory module, ground yourself and remove the existing module:
3
Use your fingertips to carefully spread apart the securing clips on each end of the memory
a
module connector until the module pops up.
Remove the module from the connector.
b
132
Adding and Replacing Parts
If you need to install memory modules in two connectors, install a memory module in the
1
2
1 memory module cover
To prevent damage to the memory module connector, do not use tools to spread the memory-
2 captive screw