Appendix; System Specifications; Physical Specifications - Cisco uBR7100 Series Hardware Installation Manual

System Specifications

This appendix provides the following specifications for the Cisco uBR7100 series universal broadband
routers:
•
•
•
•

Physical Specifications

Table A-1
Description
Dimensions (H x W x D)
Weight
Heat dissipation
Input voltage, AC power
supply
Current
Frequency
Power factor
Input AC power
AC-input cables
Airflow
Temperature
Humidity
LAN interfaces
Console port
Auxiliary port
OL-5916-01
Physical Specifications, page A-1
RF Specifications, page A-3
DOCSIS Upstream and Downstream Specifications, page A-3
EuroDOCSIS Upstream and Downstream Specifications, page A-5
Physical Specifications and Power Requirements
Specification
3.5 x 17.5 x 18.25 in. (8.89 x 44.45 x 46.36 cm)
~ 32 lb (14.5 kg)
370 W (1262 Btu
100 to 240 VAC
5 to 2.5 A
50/60 Hz
0.80 to 0.95
525 W
18-QEG4 3-wire cable, with a 3-lead IEC-320 receptacle on the power
supply end, and a country-dependent plug on the power source end
~120 cfm
32 to 104°F (0 to 40°C) operating; –4 to 149°F (–20 to 65°C)
nonoperating
10 to 90% noncondensing
2 Ethernet 10BASE-T/100BASE-TX autosensing (RJ-45)
Asynchronous serial (RJ-45)
Asynchronous serial (RJ-45) with hardware flow-control
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
A P P E N D I X
1
)
2
3
(maximum)
4
A
A-1