Operation Of Your New Bike - Spirit XBR95 Owner's Manual

Operation of Your Stationary Bike
XBR95 & XBU75 Console
■
Power on
The X Series Bikes have a built-in generator for power and does not need to be plugged into an AC
outlet. To power up the Elliptical simply start to pedal, the console will turn on automatically. If the
console does not light when you pedal, check that the power switch is set to 0 (Generator). The
switch is located on the front, lower left side of the main plastic cover.
When initially powered on the console will perform an internal self-test. During this time all the lights
will turn on for a short time. When the lights go off the dot matrix display will show a software version
(i.e. VER 1.0) and the message window will display an odometer reading. The odometer reading
displays how many hours the Elliptical has been used and how many virtual miles the Elliptical has
gone. The display shows: ODO 123 MI 123 HRS.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display. The dot matrix display will be scrolling through the different profiles, showing the programs,
and the message window will be scrolling the start up message. You may now begin to use the
console.
19
XBR95 & XBU75