Connectors; Floppy Disk Drive Connector: Fdd1; Fan Power Connectors: Cpufan1/Sys_Fan1 - MSI MS-7204 Instruction Manual

M S-7204 mBTX M ainboard
The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN,
and USB Ports.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

Fan Power Connectors: CPUFAN1/SYS_FAN1

The CPUFAN1 (processor fan), SYS_FAN1 support system cooling fan with
+12V. It supports four/three-pin head connector. W hen connecting the wire to the
connectors, always take note that the red wire is the positive and should be con-
nected to the +12V, the black wire is Ground and should be connected to GND. If the
mainboard has a System Hardware Monitor chipset on-board, you must use a spe-
cially designed fan with speed sensor to take advantage of the CPU fan control.
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. CPUFAN1 supports the fan control. Fan/heatsink with 3 or 4 fins
are both available.
3. Be sure to configure the CPU FAN PIN Select in BIOS for the
CPU Fan you are using first.
4. Please refer to the recommended CPU fans at Intel
website.
2-14

Connectors

+12V
Sensor
GND
SYS_FAN1
FDD1
SENSOR
+12V
Control
GND
CPUFAN1
official
®