Pride Mobility Jazzy 1113 Owner's Manual page 42

Pride power chair
Hide thumbs Also See for Jazzy 1113:
Table of Contents

Advertisement

NOTE: The socket may also be used for reprogramming the Europa. Contact your authorized Pride
provider for more information.
Sleep Mode (If Enabled)
The power chair controller features a sleep mode. Sleep mode is a built-in circuit that will automatically shut off the main power
if the joystick is not moved in any direction for a period of time. This time factor is programmed into the controller. To restore
power and continue, push and key on the keypad.
Fault Codes
The system status LED is displayed within the on/off key. This LED is lit if the system is turned on. It also flashes in groups called
flash codes, to indicate system faults. The table below identifies the individual fault codes. If your keypad displays one of these
codes, contact your authorized Pride provider.
FLASH CODE
SEQUENCE
•—•—•—
••—••—••—
•••—•••—
••••—••••—
•••••—•••••—
••••••—••••••—
•••••••—•••••••—
•••••••—•••••••—
•••••••—•••••••—
•••••••—•••••••—
•••••••—•••••••—
•••••••—•••••••—
NOTE: You must turn the controller off and then on again to reset the controller, even if the source of the fault is
removed/corrected.
In the event of a fault, the system status LED displays diagnostic indications. Faults are encoded as follows: one (for a low
battery voltage fault) to twelve (module mismatch) and are displayed by the LED flashing the number of times prescribed by the
fault code. The flash sequence (one to twelve) is followed by a long off period (2 seconds). If more than one fault exists, then the
fault having the highest priority is indicated. The controller must be turned off and then on again even if the source of the fault is
removed. If you cannot resolve the problem, contact your authorized Pride provider.
42
V I I I .
O P E R A T I O N
DIAGNOSIS
DX MODULE FAULT
DX ACCESSORY FAULT
LEFT MOTOR (OR CONNECTION) FAULT
RIGHT MOTOR (OR CONNECTION) FAULT
LEFT PARK BRAKE FAULT
RIGHT PARK BRAKE FAULT
LOW BATTERY FAULT
OVER VOLTAGE FAULT
CANL FAULT
CANA FAULT
STALL TIMEOUT
MODULE MISMATCH
www.pridemobility.com
SOLUTION
SEE YOUR AUTHORIZED PRIDE PROVIDER.
SEE YOUR AUTHORIZED PRIDE PROVIDER.
CHECK LEFT MOTOR WIRING.
CHECK RIGHT MOTOR WIRING.
CHECK MOTOR/BRAKE WIRING.
CHECK MOTOR/BRAKE WIRING.
CHECK THAT THE BATTERY WIRING IS SECURE.
CHECK THAT THE BATTERY WIRING IS SECURE.
SEE YOUR AUTHORIZED PRIDE PROVIDER.
SEE YOUR AUTHORIZED PRIDE PROVIDER.
TURN UNIT ON, THEN OFF.
SEE YOUR AUTHORIZED PRIDE PROVIDER.
US Jazzy 1113/Rev I/Feb03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents