Health O Meter 2600KL Operation Manual page 17

OPERATION INSTRUCTIONS
02 About
06 SYSTEM TEST
01 Battery Test
02 USB Connection
Set the date using the up and down keys
values on the keypad.
This screen displays the software version of the scale.
The scale will display the estimated amount of battery life
remaining until the batteries will have to be replaced.
NOTE: In order to complete the battery test, the scale must be
powered by batteries only. Unplug the scale from AC power
source prior to battery test.
The scale will test the connection to the PC and will display a
message "Connection is OK" or "NO Connection".
If "NO Connection" is displayed, check your USB connections
on the scale and on your PC and retest the connection. Refer
to qualified service personnel if problem persists.
16
and enter the