Reassembly - Polaroid Macro 5 SLR Repair Manual

Repair Manual

2. Reassembly

a. Install the date code module onto its camera back rail slot.
b. Using a torx driver, tighten the six (6) screws that secures the camera
back to the cone assembly.
c. Connect electrical cable J16 to the logic PC board.
d. Install the bottom cover as explained on page 48.
e. Install the rear cover assembly as explained on page 46.
f. Install the left/right cover assembly as explained on page 42.
72
Macro 5 SLR Camera