Table of Contents
Advertisement
Advanced Options
Miscellaneous Options
The
MISCELLANEOUS
Curtain Pattern
The curtain pattern determines what the m70L will show when you press the
CURTAIN
Plug and Play (EDID Enable)
Plug and Play allows the source computer's video card to query the display and send
the correct resolution. Most video cards work with Planar displays. For the few that
don't, you may need to turn off Plug and Play and manually specify the video card
settings based on the display's capabilities.
Preferred Source Detection
Analog computer video cards provide only vertical and horizontal frequencies.
Sometimes, this is not enough information for the display to properly detect the
signal. In certain cases, a display receiving such "ambiguous" signal modes could
misinterpret the resolution to be any of three different modes. For example,
1024 x 768, 1280 x 768, and 1360 x 768 all have the same respective horizontal and
vertical frequencies but represent different aspect ratios, 4 x 3, 15 x 9, and 16 x 9,
respectively. By specifying the correct source detection mode, the display can
correctly interpret the signal and display the incoming image in the proper aspect
ratio. The default preferred source detection is 16 x 9. This is the native aspect ratio of
this display. If you are attempting to display a 4 x 3 signal and it is not working, try
changing the preferred source detection to 4 x 3.
Allow Frame Lock
Frame lock causes the display to synchronize its vertical refresh timing with that of
the incoming source. This prevents frame tearing or frame dropping. To frame lock,
the incoming signal must be within the refresh parameters of the display itself, which
is from 49.3Hz to 64.8 Hz.
54
menu contains several unrelated settings. To access the
MISCELLANEOUS
menu, press
M isc el la ne ou s
button.
m70L Installation & Configuration Guide
twice on the remote.
MISC
Cu rta in Pa t te rn
Plu g a n d Pla y ( ED ID E na bl e)
Pre fe rre d So ur ce De t ect io n
Al lo w F ra me L o ck
L o g o
16 x 9
Advertisement
Table of Contents
