Sample Wireless Flash Setup - Canon SPEEDLITE 430EX II Instruction Manual

8
6
Set the master unit's flash mode
to
<ETTL>.
• For shooting,
<ETTL>
will also be
set automatically for the slave unit(s).
7
Check that the flash is ready.
• When the slave unit(s) is ready to fire
(fully charged), the AF-assist beam
I
will blink at 1-sec. intervals.
Check the flash operation.
• Press the master unit's test firing
button .
... The slave unit will fire. If the flash
does not fire, adjust the slave unit's
angle toward the master unit and
distance from the master unit.
9
Set the camera and shoot.
• Set the camera in the same way as
with normal flash shooting.
Sample wireless flash setup
Slave B
(430EX II)
8m (26.2ft.) 12m (39.4ft.)
"'" 80°
"
\
\
\
o
utdoors
J--~~"""""--
Master unit such as
Speedlite 580EX II
27