Table 5 Command List - Fluke 1504 User Manual

Table 5 Command List

Command
Measurement Commands
T
F[ETCH?]
SA[=[[[hh:]mm:]ss]
U=C|F|K|O
ST[=ON/OF]
CL[=hh:mm:ss]
Probe Characterization Commands
PR[=T/R|R|]
R0[=<value>]
AL[=<value>]
DE[=<value>]
BE[=<value>]
B n [=<value>]
CO=<value>
Sample Parameter Commands
FI[=<value>]
PS[=<value.]
Communication parameter commands
DU[=F/H]
LF[=ON/OF]
Calibration Commands
*PA=<password>
*LO=[=CA|AL]
*C0[=<value>]
*C1[=<value>]
*C2[=<value>]
*SN[=<value>]
Miscellaneous Commands
Description
read measurement (includes label, unit, and time)
read measurement value (SCPI compatible)
read [or set] serial sample period
select units
read [or set] the time stamp
read [or set] the system clock
read [or select] the characterization type
read [or set] R0
read [or set] α for the Callendar-Van Dusen characterization
read [or set] δ for the Callendar-Van Dusen characterization
red [or set] β for the Callendar-Van Dusen characterization
read [or set] b , b , b , or b for the thermistor characterization
0 1 2 3
test resistance to temperature conversion
read [or set] filter time constant
read [or set] the power saver period
read [or set] serial sample duplex mode
read [or set] serial linefeed
disable password lockout of calibration commands
read [or set] menu lockout
read [or set] the 0Ω calibration parameter
read [or set] the 10KΩ calibration parameter
read [or set] the 100ΚΩ calibration parameter
read [or set] the instrument serial number
7 Digital Communications Interface
Remote Commands
29