Z6806125101A-SCP-2430(P)-ENGLISH37 37
Z6806125101A-SCP-2430(P)-ENGLISH37 37
5.
Select <PRESET SPEED> and adjust the pan/tilt speed of the preset.
6.
Set the <DWELL TIME> that defi nes the camera's hold duration and <IMAGE
HOLD> of the preset.
If you set the <IMAGE HOLD> to <ON>, the video image will be held still until the
camera reaches the preset position.
7.
Set <CAMERA SET> to <ON>.
You can adjust camera setups for each
preset.
For details on setting <IRIS>, <WHITE BAL>
and <FOCUS MODE>, refer to "CAMERA
SET". (pages 24 ~ 33)
M
The preset position can be specifi ed for a
tilt range of between -6° and 90°.
Those presets that are out of a tilt of 90° can not be specifi ed.
If you try to specify a preset position for a range exceeding a tilt of 90° using a
controller (SSC-1000, 2000 or 5000), you will see a message of <SET AGAIN> on
the screen. If this is the case, try again for a range below a tilt of 90°.
If you upload/download the menu setting using SSC-1000, 2000 or 5000, the
preset may differ from the menu setting so defi ne the preset again after the
operation.
CAMERA SET
CAMERA SET
IRIS
WHITE BAL
WHITE BAL
FOCUS MODE
FOCUS MODE
English _37
ALC
MF
MF
2010-05-04 오후 2:46:
2010-05-04 오후 2:46: