Salus iT500 User Manual page 2

iT500 User Manual 16pp 025_Layout 1 03/09/2013 12:00 Page 2
Product compliance & safety information
These instructions are applicable to the SALUS Controls model stated on the front cover of this manual
only, and must not be used with any other make or model.
This accessory must be tted by a competent person, and installation must comply with the guidance
provided in the current IEE Wiring Regulations and current Building Regulations. Failure to comply with
the requirements of these publications could lead to prosecution.
Always isolate the AC Mains supply before installing or working
on any components that require 230 VAC 50Hz supply.
When tting batteries, do not mix old and new batteries together.
Do not use rechargeable batteries.
Please leave these instructions with the end user where they should be kept in a safe place for future
reference.
02 iT500 User Manual