Installation Instructions; Choose A Location; Connect To A Drainage System - Hotpoint Ultima WD71 Instruction Manual

Installation Instructions

IMPORTANT INFORMATION:
Do not plug in and switch appliance on at the mains until installation is complete.
You may be charged for a service call if a problem with your appliance is caused
by incorrect installation or misuse.
4
Follow these 5 steps for a trouble free installation:

1. Choose a Location...

2. Remove Transit Brackets...
3. Connect to the Water Supply...

4. Connect to a Drainage System...

5. Adjust the Feet...
1. Choose a Location...
The choice of location for your appliance will influence its performance.
Position where possible on a solid floor. Vibration may occur with a wooden floor.
Take care with vinyl floor coverings. The weight of the appliance may cause indentations
in some vinyl floor coverings.
For your safety and to comply with IEE regulations, you should not install your appliance
in a bath or shower room. Seek professional advice if you wish to do so.
Ensure sufficient space is allowed for the appliance. The dimensions should be a
minimum of 600 mm wide, 600 mm deep and 900 mm high.
Ensure the electrical socket and water taps are easily accessible and that the water
supply can be isolated if necessary.