Wash & Auto Dry Programme - Hotpoint Ultima WD71 Instruction Manual

Wash & Auto Dry Programme
WARNINGS
Do not allow children to
play with the appliance
or tamper with the
controls.
Do not overload
appliance! It may
damage laundry and
reduce the quality of
the wash.
Do not attempt to open
the door when water is
visible in the drum or if
the symbol is
displayed in the
Infobubble™.
Do not use a dosing
ball to dispense
detergent when using
a wash and auto dry
programme.
Note: We recommend
on completion of your
programme that you
switch off both the
electricity and water
supply to the appliance.
10
Switch on both the
1
water & electricity
supply at the mains.
Add detergent/conditioner
4
to the dispenser drawer
(pages 17-18).
Refer to detergent
manufacturer's dosage
instructions.
Select optional wash &
7
dry features (pages 15 -
16), you will hear a beep
and the Infobubble™ will
display the selection.
Sort laundry by label into
2
groups with the same
wash & dry requirements,
load appliance.
Switch 'ON', a coloured
5
band indicates selection.
The Infobubble™ will
display 'Select
Programme'
Press 'START', the door
8
will lock and the
symbol will appear in the
Infobubble™ throughout
the wash & dry
programme.
Close door by applying
3
pressure at the
2 o'clock position.
Select wash programme,
6
(page 12), you will hear
a beep and the
Infobubble™ will display
the programme
information.
1-2 minutes after
9
completion of the wash
programme the
symbol will disappear
and the door can be
opened. Switch 'OFF'
after use.