Establishing A Connection In The Infrastructure Mode - Brother P-touch PT-P750W User Manual

Printing from Computers

Establishing a Connection in the Infrastructure Mode

 For Windows
a
Confirm the SSID (network name) and password of your WLAN access point/router beforehand.
b
Connect the printer and computer with a USB cable.
c
If the Wi-Fi lamp is not lit, press and hold the Wireless Mode button for one second to turn on the
wireless LAN function. After the Wi-Fi lamp is lit, release the button. The Wi-Fi lamp flashes.
d
Start the Printer Setting Tool on your computer, and click [Communication settings] button.
For details on the Printer Setting Tool, see Printer Setting Tool (for Windows
e
In [Wireless Settings] in the [Wireless LAN] tab, confirm that [Communication Mode] is set to
[Infrastructure].
f
Enter the SSID that you have noted, or click [Search] and select the SSID from the displayed list.
g
Enter the password as [Passphrase].
Note
Information to be entered varies depending on the authentication method and encryption mode. Enter
necessary information for your network environment.
h
Click [Apply].
i
When the connection is established, the Wi-Fi lamp is lit.
Note
If you want to change any other network settings, use the Communication settings.
For details on the Communication settings, see Using the Communication Settings on page 19.
For Macintosh

Use the Wireless Device Setup Wizard, which you can download from the [Downloads] page on the
Brother Solutions Center (http://support.brother.com/).
Note
If you use the Ad-hoc mode, refer to [FAQ's & Troubleshooting] on the Brother Solutions Center
(http://support.brother.com/).
2
®
) on page 19.
6
2