Introduction; Precondition; Guidance For Using The Manual; For System Structure With Serial Connection - Brother PT-P900 Reference Manual

1. Introduction

1.1. Precondition

This manual explains the product under the precondition that the following knowledge has already acquired.
Mitsubishi Electric programmable controller ladder program, ST language, and FB (Function Block) are

fully understood
Development tool GX Works3 operation method is fully understood


1.2. Guidance for using the manual

The content of the manual you need to be referred to differs depending on which communication method
your system uses to connect the sequencer and the label printer.

1.2.1. For system structure with serial connection

2. Outline
2.1. Outline of "Sample program"
2.2. Label printer structure
2.2.1. For serial connection
2.3. System structure
2.3.1. For serial connection
3. Preparing templates
3.1. Template setting
3.2. Template creation
3.3. Template transfer
4. Label printer unit setting
4.1. Printer setting tool
4.2. For serial connection
5. Setting at programmable controller side
5.1. For serial connection
6. Sequence program outline
6.1. Function outline
6.2. Program outline
7. Sequence program explanation
7.1. For serial connection
4
MELSEC iQ-F Brother Label Printer Sample Program Reference Manual