Canon Selphy CP910 User Manual page 28

Reducing the Appearance of Red-Eye
(Correct Red-Eye)
z z Correct images affected by red-eye.
z z Off (default) / On
• Red-eye correction may mistakenly be applied to areas of the image
other than the affected eyes. To avoid this, select [
images affected by red-eye.
• Turning off SELPHY or removing the memory card will restore the default
setting of [ Off].
• Red-eye may not be detected or corrected well on faces covering a very large/
small area of the screen, on bright/dark faces, in shots from the side of or at an
angle to the face, or when part of the face is not visible.
•
Red-eye correction is not applied when [Page Layout]
2-up], [ 4-up], [ 8-up], or [
• Similarly, red-eye correction is not applied when [My Colors]
[ Sepia] or [ B/W].
• The degree of correction may vary depending on cropping, page layout, and
paper size.
On] only for
(= 25) is set to [
Index].
(= 27) is set to
Printing with the Date (Date)
z z
Add camera shooting dates when you print.
z z Off (default) / On
• To prevent two instances of the date on images already labeled by
the camera, select [ Off].
• Turning off SELPHY will restore the default setting of [
• The date added to prints cannot be changed, because it is the date assigned
by the camera when the photos were taken.
• To change how the date displays, adjust [Date Format]
• Dates are not printed when [Page Layout]
[ Shuffle].
Cover
Contents
08/08/2013
Part Names
Basic Operations
Print Settings
Off].
Printing via Wi-Fi
(= 29).
(= 25) is set to [ Index] or
Printing via USB
Cable
Troubleshooting
Appendix
28