Advanced Picture Settings - Sharp LC-19A35H-BK Operation Manual

Watching TV

Advanced picture settings

The advanced settings enable you to set the picture
adjustment in more detail. There are six options you
can choose from.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select the desired menu, and
4
then press ENTER.
Press a / b or c / d to select the desired level,
5
and then press ENTER if necessary.
H C.M.S. (Colour Management System)
Colour tone is managed using the six-colour
adjustment setting.
Selected item
C.M.S-Hue This is a standard to adjust the colour
either more reddish or more bluish in tone.
C.M.S- Increases or decreases the saturation of a
Saturation selected colour.
C.M.S-Value A higher value makes the image brighter.
A lower value makes the image darker.
NOTE
• For resetting all adjustment items to factory preset values,
press a / b to select "Reset", and then press ENTER.
H Colour Temp. (Colour Temperature)
Adjusts the colour temperature to give the best white
image.
Selected item
High White with bluish tone
Mid-High
Middle
Mid-Low
White with reddish tone
Low
H Film Mode
Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
fi lm frame for high-defi nition picture quality.
Description
Description
H 3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Selected item
Standard Normal adjustment
Fast For movie image
Slow For still image
Off 3D-Y/C off
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
H Monochrome
For viewing images in monochrome.
H I/P Setting
Adjusting the image and input signal can give you a
more beautiful picture.
Description
31