American DJ 3 Sixty 2R User Instructions page 19

3 Sixty 2R
All effects will be canceled, the shutter will open and output intensity
will be 100%. With the individual functions you can focus the light on
flat surface (a wall) and finely adjust the lamp.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Effect Adjust" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Manual Control" is dis-
played, press ENTER.
3. Use the UP or DOWN buttons to scroll through the various func-
tions.
4. Press ENTER when you find the function you would like to adjust
or press MODE/ESC to exit.
Calibration - With this function you can calibrate and adjust the
effects wheels to their correct positions. The Calibration password
050.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "Effect Adjust" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Calibration" is displayed,
press ENTER.
3. "XXXX" will be displayed. The password is 050.
4. Press ENTER to confirm or press MODE/ESC to exit.
USER MODE SET
User Mode - This mode will let you select your desired DMX Channel
mode.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "User Mode Set" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "User Mode" is displayed,
press ENTER.
3. Use the UP or DOWN buttons to scroll through the 3 DMX Channel
Modes.
ADJ Products, LLC - www.adj.com - 3 Sixty 2R Instruction Manual Page 36
System Menu 3 Sixty 2R
Standard Mode - This is 24 Channel Mode.
Basic Mode - This is 21 Channel Mode.
Extended Mode - This is 32 Channel Mode.
User Mode A B C - These are customizable DMX modes. Select
either of these modes and set the amount of DMX Channels and
what each channel does.
4. Press the MODE/ESC button once to return to the "User Mode
Set" menu.
Edit User Mode – This function allows the user to make the actual
changes to the DMX channels.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that "User Mode Set" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Edit User Mode" is dis-
played, press ENTER.
3. Use the UP or DOWN buttons to find the User Mode you would
like to edit, and press ENTER.
4. Use the UP and DOWN buttons to find the trait you would like to
edit and press ENTER. Use the UP and DOWN buttons to change the
trait to your desired Channel number.
EDIT PROGRAM: - The fixture comes equipped with a built-in DMX
recorder that allows custom programs to be installed and recalled
directly from the fixture's control board. Programs can be created and
stored using the fixture's control board or by using an external DMX
controller.
Select Program – This function allows the user to select one of ten
of the user defined built-in programs. This program is then accessed
in "Function Mode" under "Program Run."
Edit Program – This function allows the user to edit the built-in pro-
grams.
Edit Scenes – This function allows the user to edit or define the
ADJ Products, LLC - www.adj.com - 3 Sixty 2R Instruction Manual Page 37
System Menu