Signals; Calendar Clock - Oregon Scientific RGR382 User Manual

Wireless rain gauge with rainfall memory and digital clock
Table of Contents

Advertisement

The rain alarm indicator will light up.
The alarm will go off for one minute when the rainfall reaches
the preset value and the rain alarm indicator will flash. A
reminder beep will be emitted every minute. Once the rain
alarm is on the indicator will not stop flashing unless RAIN
ALM is pressed or the rain alarm value is changed. To stop
the alarm and reminder beep, press any button or change
the rainfall alarm value.
To toggle the alarm ON / OFF, press RAIN ALM ON / OFF.

SIGNALS

If without obvious reason the main unit display goes blank,
press and hold SEARCH for 2 seconds to enforce an
immediate search of the rain collector.
ICON
If that fails, check:
The remote rain collector is still in place.
The batteries of the main unit and rain collector have
not run out of power. Replace them if necessary.
The transmission is within range and path is clear of
obstacles and interference. Shorten the distance if
necessary.
Then press SEARCH again.
DESCRIPTION
No signal
Searching for signal
Signal connected
6

CALENDAR CLOCK

The calendar clock is displayed on the bottom line of the
display. Use MODE to toggle between clock, calendar and
daily alarm.
To set the clock:
1.
Press MODE to display the clock or calendar.
2.
Press and hold MODE for two seconds and use HIST
/ UP or DOWN to set the desired clock or calendar
value.
3.
Press MODE and repeat from step 2 to complete all
settings.
4.
Press MODE to confirm.
To set the daily alarm:
1.
Press MODE to display the daily alarm. The daily alarm
will be activated automatically. The daily alarm indicator
will light up.
2.
Press and hold MODE for two seconds and use HIST /
UP or DOWN to set the desired value. Press and hold
for faster increments.
3.
Press MODE and repeat from step 2 to complete all
settings.
When active, the daily alarm will go off for one minute at the
set time and the daily alarm indicator will flash.
To stop the alarm:
Press any button. The alarm is still active and will go off at
the set time the following day.

Advertisement

Table of Contents
loading

Table of Contents