Key Assignment Mode - Kenwood ProTalk Digital TK-3401D Instruction Manual

This transceiver allows you to reprogram the Side 1 and
Side 2 keys with any of the functions listed in the table below.
Explanations on the use of each function are provided under
"PROGRAMMABLE FUNCTIONS" {p.22}.
Table
Number
0 None (no function)
1 Calling Alert
2 Key Lock
3 Monitor
4 Monitor Momentary
Scan/ Scan Temporary Delete* 1
5
6 Scrambler
7 Squelch Off
Squelch Off Momentary
8
(Side 2 key default)
9 Zone (Side 1 key default)
✓ : Available
N/A: Not Available
*1 : Press and hold the Side 1 or Side 2 key for 2 seconds will
activate the Scan Temporary Delete function.
To change the functions of the Side 1 and Side 2 keys:
1 With the transceiver power OFF, press and hold the Side 1
and Side 2 keys while turning the transceiver power ON.
• Continue to hold the Side 1 and Side 2 keys until the LED
lights orange and the transceiver announces "Setup".
20

KEY ASSIGNMENT MODE

Function Name Digital Analog
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓
N/A
✓
N/A
✓
N/A
✓ ✓