Basic Operations - Kenwood ProTalk Digital TK-3401D Instruction Manual

1 Turn the Power switch/ Volume control
clockwise to switch the transceiver power
ON.
• A beep will sounds.
2 Press the key programmed with the
[Monitor] or [Squelch Off] (Side 2 key
default) function to hear background noise,
then rotate the Power switch/ Volume
control to adjust the volume.
3 Rotate the Selector to select your desired
channel.
• When you receive an appropriate signal, you
will hear audio from the speaker.
4 To make a call, press and hold the PTT
switch, then speak into the microphone
using your normal speaking voice.
• Hold the microphone approximately 3 to 4 cm
(1.5 inches) from your lips.
5 Release the PTT switch to receive.
Note:
◆ When the battery pack voltage becomes too low, transmission will
stop and an alert tone will sound.
10

BASIC OPERATIONS