Miele Gas cooktop Operating And Installation Instructions page 32

Installation
Solid wood and tiled worktops
a Countertop
b Cooktop
c Gap
d Wooden frame 1/4" (7 mm)
(to be provided on site)
As the ceramic glass and the
countertop cut-out have a certain
dimensional tolerance, the size of
gap c can vary.
32
^ Make the countertop cut-out as
shown in "Building-in dimensions".
Remember to maintain the minimum
safety distances (see "IMPORTANT
INSTALLATION SAFETY
INSTRUCTIONS").
^ Fix the wooden frame d 1/16"
(2 mm) below the top edge of the
countertop (see diagram).
^ Feed the power cord down through
the cut-out.
^ Center the cooktop b in the cut-out.
^ Connect the cooktop to the mains
(see "Electrical connection").
^ Connect the appliance to the gas
supply (see "Gas connection").
^ Secure the appliance at the back and
front using the brackets supplied.
See "Securing the appliance".
^ Check that the cooktop works.
^ Seal the remaining gap c with a
silicone sealant that is heat-resistant
to at least 320 °F (160 °C).
Please follow the manufacturer's
instructions.
For granite and marble tiles only
use a silicone sealant that is
specifically formulated for granite
and marble, and observe the
sealant manufacturer's instructions.