SETTING TIGHT OR NORMAL SQUELCH
(CONVENTIONAL OPERATION ONLY)
Use this feature to filter out nuisance
(unwanted) calls and/or background noise.
However, tightening squelch could cause calls
from remote locations to be filtered out as well.
In this case, normal squelch may be more
desired.
To select tight or normal squelch:
Press the preprogrammed Squelch button
(see page 20) to toggle between tight and
normal squelch,
–or–
Do the following:
) to enter menu mode.
+ or ? until
) to select
+ or ? until
Utilities
Utilities
Squelch
) to select
Squelch
Sqlch Tight?
+ or ? until
–or–
Sqlch Normal?
until
) to confirm the selection.
61
English