Quick Access to Convenient Features
Vibrate Mode
Sets the phone to vibrate instead
of ring. To set Vibrate Mode
press and hold
seconds. To return to Normal
Mode, press and hold
Lock Mode
Sets your phone to require your
4-digit password in order to use
the phone. To set Lock Mode,
press & hold
lock code.
Note
By default, the lock code/password
is the last 4 digits of your phone
number. You can change this
code/password in Security menu.
Mute Function
The Mute Function does not
transmit your voice to the caller.
Still, you will be able to hear the
caller. (Only available during a call)
24
for 3
.
and enter the
Volume Quick Adjustment
Quickly adjust ringer and
earpiece volumes by pressing the
upper side key to increase and
lower key to decrease. (Only
available when the slide is open)
Note
The earpiece volume can only be
adjusted during a call and Keypad
volume can only be adjusted
through the OK -> Settings ->
Sound Settings -> Keypad Volume.
Call Waiting
During a call, one beep indicates
another incoming call. Check
with your service provider for
information about this function.
Press
to receive the waiting
call then press
switch between calls.
again to