Chapter 11: Channel View : Fx; Introduction; The Swipe Zone - Mackie DL1608 Reference Manual

Mackie DL1608 Reference Guide V1.2

Chapter 11: Channel View : FX

Introduction

The DL1608 has one reverb and one delay and these may be fed from any combination of channels.
There are a wide variety of reverb and delay types at your disposal on the Master Fader app. As seen
in the image below, the Master Fader app follows standard FX send and return confi guration so the
learning curve is kept to a minimum.
The FX are essentially conjoined, reverb on top, delay just below. The sends and returns for the current
channel are displayed here. This allows you to easily adjust both FX in one convenient location for each
selected channel; channel 1 in this example.

The Swipe Zone

Here in the FX view, swipe anywhere in the gray area outlined above. Swiping up displays that
channel's EQ view. Swiping down displays that channel's gate and compression view. And swiping
left and right changes channels.
62