Table of Contents
Advertisement
You can use the power point, located on the
rear of the center console, for powering
electrical devices that require up to 150
watts.
When the indicator light, located on the
power point, is:
•
on — power point is working, ignition is
on and you have the device plugged in.
•
off — power point is off, ignition is off or
you do not have a device plugged in.
•
flashing — power point is in fault mode.
The power point temporarily turns off power
if you exceed the 150 watt limit. It can also
switch to a fault mode when it overloads,
overheats or shorts. For overloading and
shorting conditions, unplug your device and
switch the ignition off and then back on. For
overheating conditions, let the system cool
off, then turn the ignition off and then back
on.
MKC (TME), enUSA
Auxiliary Power Points
The power point is not designed for electric
devices such as:
•
Cathode ray tube type televisions.
•
Motor loads, such as vacuum cleaners,
electric saws and other electric power
tools, compressor-driven refrigerators,
etc.
•
Measuring devices, which process
precise data, such as medical equipment,
measuring equipment, etc.
•
Other appliances requiring an extremely
stable power supply:
microcomputer-controlled electric
blankets, touch sensor lamps, etc.
156
Advertisement
Table of Contents
