Degraded Raid Array - MSI Z68A-GD65 B3 series User Manual

Intel RAID Intel RAID

Degraded RAID Array

A RAID 1, RAID 5 or RAID 10 volume s reported as degraded when one of ts hard drve
members fals or s temporarly dsconnected, and data mrrorng s lost. As a result, the
system can only utlze the remanng functonal hard drve member. To re-establsh
data mrrorng and restore data redundancy, refer to the procedure below that corre-
sponds to the current stuaton.
Mssng Hard Drve Member
1. Make sure the system s powered off.
2. Reconnect the hard drve.
3. Reboot the system to Wndows; the rebuld wll occur automatcally.
Faled Hard Drve Member
1. Make sure the system s powered off.
2. Replace the faled hard drve wth a new one that s of equal or greater capacty.
3. Reboot the system to Intel RAID Opton ROM by press <Ctrl> and <I> keys smul-
taneously durng the Power-On Self Test (POST).
RAID Volumes
ID Name
0 Volume0
Physcal Dsks:
Port Devce Model
1 XXXXXXXXXXXXX
2 XXXXXXXXXXXXX
Press <CTRL-I> to enter Configuraton Utlty..
4. Select the port of the destnaton dsk for rebuldng, and then press ENTER.
RAID Volumes :
None defined.
Physcal Devces :
Port Devce Model
1
2
B-12
Level Strp
RAID 1(Mrror) N/A
Seral #
XXXXXXXXXXXXX
XXXXXXXXXXXXX
[
1. Create RAID Volume
[
DEGRADED VOLUME DETECTED
2. Delete RAID Volume
"Degraded" volume and dsk avalable for rebuldng detected. Selectng
a dsk ntates a rebuld. Rebuld completes n the operatng system.
DISK / VOLUME INFORMATION
[
Select the port of the destnaton dsk for rebuldng (ESC to ext):
Port Drve Model
1 XXXX-XXXXXXXX
Seral #
XXXX-XXXXXXXX XXXXXXXXXXXXXX
[ ↑↓] - Prevous/ Next
XXXX-XXXXXXXX XXXXXXXXXXXXXX
[ ↑↓] - Select [ESC] - Ext
Sze Status
XXX.XGB Degraded
Sze Type/Status(Vol ID)
XXX.XGB Member Dsk (0)
XXX.XGB Member Dsk (0)
MAIN MENU
]
4. Recovery Volume Optons
]
4. Recovery Volume Optons
5. Ext
]
Seral #
XXXXXXXXXXXXXX XXX.XGB
Sze Type/Status (Vol ID)
XXX.XGB Non-RAID Dsk
[ENTER] - Select [ESC] - Ext
XXX.XGB Non-RAID Dsk
[ENTER] - Select Menu
Bootable
Yes
Sze