HP ISCSI SR2122 Getting Started Manual page 17

Iscsi storage router
Table of Contents

Advertisement

To present Unit 1 to the SR2122, the command would be:
Whether the MSA 1000 is running in PDLA or VSA Mode will determine how the LUN
number is presented. In PDLA, the SR2122 will see Unit 1 as LUN 2 whereas in VSA Mode
the SR2122 will see the unit as LUN 1.
Note:
must be added to the MSA1000 Unit.
The SR2122 should now be able to present Unit 1 as storage to iSCSI Initiators.
Presenting RA/MA8000, ESA/EMA12000, and EMA16000 LUNs to the SR2122
RA/MA8000, ESA/EMA12000, and EMA16000 (HSG80) storage volumes must be
pre-configured before the LUN(s) can be detected and recognized by the SR2122. The HSG80
controllers can be configured either through its serial port or through the HSG Element
Manager application found on the SAN Management appliance.
Whatever method is chosen we must now use the HSG80's selective storage presentation
(SSP) commands to restrict access to volumes that are to be served to the SR2122.
First, the Show Connection command will determine if the HSG80 is aware of the SR2122 FC
port(s).
HSG80> Show Connections
!NEWCON09
!NEWCON10
On initial discovery the SR2122 FC ports are assigned names that begin with !NEWCON# in
the HSG80 connection table.
These entries may be renamed to a more user-friendly naming convention with the Rename
command.
iSCSI SR2122 Storage Router: Getting Started Guide
Box 1, Bay
Box 1, Bay
Box 1, Bay
Box 1, Bay
Box 1, Bay 11, (SCSI bus 1, SCSI id
Logical Volume Raid Level: PARITY FAULT TOLERANCE (Raid 4)
Logical Volume Capacity: 138,927MB
MSA1000> add acl wwpn=28000002-3d071bc0 unit=1
Allowing 28000002-3d071bc0 access to unit 1.
If using SR2122 Cluster mode, the WWPN for a FC port on each SR2122 cluster member
WINNT
HOST_ID=1000-0002-3D07-1E60
WINNT
HOST_ID=1000-0002-3D07-1E60
HSG80> rename !newcon09 isrfc1-p1
HSG80> rename !newcon10 isrfc1-p2
6, (SCSI bus 0, SCSI id
7, (SCSI bus 0, SCSI id
8, (SCSI bus 1, SCSI id
9, (SCSI bus 1, SCSI id
stripe_size=32kB
OTHER
ADAPTER_ID=2800-0002-3D07-1E60
THIS
ADAPTER_ID=2800-0002-3D07-1E60
Serving Fibre Channel Storage to the SR2122
5)
8)
0)
1)
3)
1
0D0F00
OL other
2
0D0F00
OL this
80
180
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks sr2122

Table of Contents