Changing The Belt Or Brushes; Cleaning A Blockage - Hoover Breeze User Instructions

CHANGING THE BELT OR BRUSHES

If your cleaner is not picking up efficiently, the belt or brushes (or both) may need replacing, but first please make
sure you have:
• Emptied the dust container
• Cleaned the filters
• Checked for blockages
Turn the cleaner over and remove 6
1
retaining screws attaching the brush guard
to the base.
Remove the brush guard
2
3
Remove brush assembly and check for
wear on the belt.
Loop the new
belt around the
motor and brush channel.
Breeze manual.indd 7
IMPORTANT: Switch the cleaner off and
remove the plug from the electricity supply
before dismantling cleaner
Hold the brush assembly and stretch the
4
belt until the brush can be slotted back
into the cleaner housing.
Rotate the brush to ensure free movement
5
of the belt.
Refit the brush guard with 6 retaining screws.
6
- 7 -
CLEARING A BLOCKAGE
IMPORTANT: Switch the cleaner off and
remove the plug from the electricity supply
before dismantling cleaner
If cleaning tools were
in use, check the
cleaning tool and the
hose.
Check the hose by
removing it from the
cleaner.
Turn the cleaner
over and rotate the
brushes until they
are free to rotate.
Check for a blockage in
the hose socket. Use a
flexible rod to remove
any obstruction.
To remove a blockage
from the Pet Hair &
Allergen Remover*,
open the nozzle at each
side, lift cover and remove
the blockage.
*Certain models only
5/1/2012 2:03:20 PM