[Version Disp.]
•
Press [MENU/SET] on the version display screen to display information about the software on the
unit.
[Format]
•
Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove the
card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the card cannot be formatted, please try another card before contacting Panasonic.
~ [Language]
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
It is possible to check which version of firmware is on the camera.
The built-in memory or card is formatted.
Formatting irretrievably deletes all the data so check the data
carefully before formatting.
Set the language displayed on the screen.
Basic
- 50 -