About the Wi-Fi connection lamp
∫
Lit blue:
The Wi-Fi connection is on standby
Blinking blue:
Sending/receiving data through the Wi-Fi connection
About the [Wi-Fi] button
∫
Pressing and holding [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone/tablet)
•
The information required for connecting the smartphone/tablet
to this unit (QR code, SSID and password) is displayed.
Pressing [Wi-Fi] before connecting to Wi-Fi
•
Following items can be selected.
[New Connection]
[History Connection]
[Favorite Connection]
[Wi-Fi Setup]
(P151)
Pressing[Wi-Fi]when using a Wi-Fi connection
•
Following items can be selected.
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending
Images]
[Register the Current
Destination to Favorite]
[Network Address]
•
Do not remove the memory card or battery or move to an area without any reception while
sending images.
•
The monitor display may become distorted for an instant while connected to the service, however
this will not affect the image being sent.
(P126)
(P147)
(P147)
Terminates the Wi-Fi connection.
Terminates the Wi-Fi connection, and allows you to select a
different Wi-Fi connection.
Refer to
Registering the current connection destination or the
connection method, you can easily connect with the same
connection method next time.
Displays the MAC address and IP address of this unit.
Wi-Fi
(P126)
P150
for details.
- 123 -
Please set on your smartphone
Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings
SSID:
Password:
DISP.
Change method
Cancel