Changing The Connection Method - Panasonic Lumix DMC-ZS35 Owner's Manual

Changing the connection method

∫
To change the connection method,
press [DISP.], and then select the
connection method.
When connecting with [Via Network]:
(On the camera)
1
Press 3/4 to select [Via Network], and then press [MENU/SET].
•
Follow the connection procedure described on
access point.
(On your smartphone/tablet)
2
Turn on the Wi-Fi function.
3
Connect the smartphone/tablet to the wireless access point to which the camera is
connected.
4
Start "Image App".
When connecting with [WPS Connection]
(On the camera)
1
Press 3/4 to select [Direct], and then press [MENU/SET].
•
Follow the connection procedure described on
tablet.
(On your smartphone/tablet)
2
Start "Image App".
¢ WPS is a function that allows you to easily set up a connection with a wireless LAN device and
make security-related settings. To check whether your smartphone/tablet supports the function,
refer to the operating instructions of the smartphone/tablet.
Terminating the connection
∫
After use, terminate the connection to the smartphone/tablet. Once turning off the
connection, you can perform normal recording and playback.
1
Press [
•
Confirmation screen is displayed.
It is executed when [Yes] is selected.
2
On the smartphone/tablet, close "Image App".
(If you are using an iOS device)
On the screen of "Image App", press the home button to close the app.
(If you are using an Android device)
On the screen of "Image App", press the return button twice to close the app.
(P125)
(P125)
].
Wi-Fi
Please set on your smartphone
Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings
SSID:
Password:
DISP.
Change method Cancel
P144 to connect the camera to a wireless
in [Direct]:
¢
P146 to connect the camera to the smartphone/
- 129 -
Select connection method
Connect to the
Via Network
network (AP)
Direct
Cancel Select Set