Forward-Facing Installation With Latch - Graco Child Restraint Owner's Manual

FORWARD-FACING INSTALLATION WITH
1. Recline fl ip foot must be in FORWARD-
FACING position (a). (If it is not, see
page 36, Recline Flip Foot.)
2. LATCH belt must be routed through
the opening in child restraint marked as
FORWARD-FACING with an ORANGE
label (b). (If it is not, see page 42,
LATCH Belt Routing For Forward-Facing
Mode.)
3. Unhook tether from tether storage (see
page 52).
4. Place forward-facing
equipped with
of installation, extend
maximum length.
5. Attach LATCH
lower anchors (c). Belt must lie fl at and
not be twisted. Pull connectors to be
sure they are securely attached (d).
on vehicle seat
LATCH anchors. For ease
LATCH belt to its
connectors to vehicle
a
CLICK!
c
e
22
LATCH
b
d
f