Advertisement
Quick Links
INSTALLATION
1
Place forward-facing on vehicle seat.
2
Lift seat pad flap, thread vehicle seat belt
through openings and buckle belt (fig. a).
3
Press down firmly in center of car seat to
compress vehicle seat cushion while tightening
vehicle seat belt.
HINT: Use your knee to press down in center
of car seat (fig. b).
4
Pull front to back and left to right to check for
secure installation (fig. c).
If not secure, see "Vehicle Seat Belts" section.
5
Attach tether hook (A) to anchor hardware (B)
and tighten strap to remove any slack (fig. d).
If tether anchor hardware (B) is not available,
see "Installation of Anchor Hardware" section.
Opening
2
(fig. a)
-
with
harness system
(fig. b)
Pull to
tighten
(fig. c)
(A)
(B)
(fig. d)
Advertisement
Related Manuals for Graco Child Car Seat with Harness System
Summary of Contents for Graco Child Car Seat with Harness System
- Page 1 Place forward-facing on vehicle seat. Lift seat pad flap, thread vehicle seat belt through openings and buckle belt (fig. a). Press down firmly in center of car seat to compress vehicle seat cushion while tightening vehicle seat belt. HINT: Use your knee to press down in center of car seat (fig.
- Page 2 Removal: • Lift adjuster bar and pull both harness straps out of current slots. • Pull harness strap out of car seat, harness tie, and tongues. Store all parts for future use. • Push buckle and crotch strap down into crotch strap opening.
-
Page 3: Harness System
HARNESS SYSTEM - removal and re-assembly (continued) Clip Clip... -
Page 4: Height And Weight Limits
The American Academy of Pediatrics recommends that children should be at least one year of age before being positioned forward facing. ❃ Outgrowing Car Seat WARNING To avoid injuries from whiplash, top of child’s ears must be below top edge of headrest.