Viewing Current Alarms - ADT Focus Cadet User Manual

Quick Start (cont'd)

Viewing Current Alarms

During an alarm (excluding holdup, hostage and duress alarms), the
operating panel will display the current alarm by type and point description.
1. Using the operating panel's numeric keypad, enter a valid ID code to
display the Action Menu 1 (see page 19) if no burglary groups are on; or
press the "Turn off" selector button (if burglary groups are on) to
deactivate all annunciating devices.
2. If burglary groups are on, complete the steps under "Turning Off
Burglary Protection" in the SYSTEM OPERATION section. When all
burglary groups are off, press Continue to display Action Menu 1.
3. Press See alarms to display the alarm type, point number, and
description.
4. Press Prev or Next to display additional alarms.
5. Press Quit to display Action Menu 1.
– 14 –
? 1 Fire Alarm
Smoke Detector
Continue